Specifications

Application View Cisco PIM Application
Device Management Page 103 Cisco Router
Last Error Type
The type of the last invalid message that was
received by this device. Possible values are none,
invalidRegister, and invalidJoinPrune.
Last Error Origin Type
The type of address stored in Last Error Origin.
This value is irrelevant if the value of Last Error
Type is none. Possible values are unknown, ipv4,
ipv6, and dns.
Last Error Origin
Represents the Network Layer Address of the
source that originated the last invalid packet. The
type of address stored depends on the value in
Error Origin Type. This value represents the
Network Layer Address of the Designated Router
(DR) whenever the value of Last Error Group is a
zero-length address, for example, when
encapsulated IP header is malformed. This value
is irrelevant if the value of Last Error Type is
none.
Last Error Group Type
The type of address stored in Last Error Group.
This value is unknown if there is a problem in the
packet received from the DR. This value is
irrelevant if the value of Last Error Type is none.
Possible values are unknown, ipv4, ipv6, and
dns.
Last Error Group
The IP multicast group address to which the last
invalid packet was addressed. The type of address
stored depends on the value in Last Error Group
Type. This value is a zero-length InetAddress if
there is a problem in the packet received from the
DR, for example, a malformed encapsulated IP
header. This value is irrelevant if the value of Last
Error Type is none.
Last Error RP Type
Represents the type of address stored in Last
Error RP. This value is irrelevant if the value of
Last Error Type is none. Possible values are
unknown, ipv4, ipv6, and dns.
Last Error RP
The address of the RP, as per the last invalid
packet. The type of address stored depends on the
value in Last Error RP Type. This value is
irrelevant if the value of Last Error Type is none.