Specifications

Application View Cisco PIM Application
Device Management Page 100 Cisco Router
IF Index
Same as IF Index (Page 89) in the IPM Route Next
Hop table.
Address
Same as Address (Page 89) in the IPM Route Next
Hop table.
Prune Reason
Indicates why the downstream interface was
pruned, whether in response to a PIM prune
message or due to PIM Assert processing. Possible
values are other, prune, and assert.
PIM Candidate Rendezvous Point
Table View
Access: From the Icon Subviews menu for the
CiscoPIMApp Application icon, select Candidate
Rendezvous Point.
This view provides the PIM Candidate Rendezvous
Point table, described below.
PIM Candidate Rendezvous Point
Table
This table lists the IP multicast groups for which
the local router is to advertise itself as a
Candidate-RP when the value of Hold Time
(Page 102) is non-zero. If this table is empty, then
the local router will advertise itself as a
Candidate-RP for all groups (providing the value
of Hold Time is non- zero). This table contains the
following information.
Group Address
The IP multicast group address which, when
combined with Group Mask (Page 101), identifies
a group prefix for which the local router will
advertise itself as a Candidate-RP.