Specifications

3-5
Cisco 7100 Series VPN Router Installation and Configuration Guide
78-6341-03
Chapter 3 Installing a Cisco 7100 VPN Series Router
Attaching a System Ground Connection
To attach the grounding lug to the chassis grounding receptacles, complete the following steps:
Step 1 Strip one end of the 6-AWG wire approximately 0.75 inch (19.05 mm) using the wire stripper.
Step 2 Insert the 6-AWG wire into the wire receptacle on the grounding lug. (See Figure 3-6.)
Figure 3-6 Attaching the Ground Wire to the Grounding Lug
Step 3
Crimp the wire receptacle around the wire using the crimping tool.
Step 4 Insert the two screws through the holes in the grounding lug. (See Figure 3-6.) Ensure that the grounding
lug does not interfere with other router hardware.
Step 5 Locate the chassis grounding receptacles on your router chassis. (See Figure 3-7.)
27307
Grounding lug
Wire
Chassis
grounding
receptacles
Screws