Specifications

1-29

Cisco 7100 Series VPN Router Installation and Configuration Guide

78-6341-03

Chapter 1 Overview

Field-Replaceable Units

Table 1-14 lists the SDRAM product numbers.

Note The amount of memory installed in slot DIMM 1 must be greater than or equal to the amount of memory

installed in slot DIMM 2, and slot DIMM 2 can be zero.

Slot DIMM 0 is used exclusively for packet memory and is fixed at 64 MB in the factory.

Rack-Mount and Cable-Management Kit

The rack-mount and cable-management kit for Cisco 7100 series routers consists of rack-mount brackets

and a cable-management bracket that are designed for mounting your router in 19- or 23-inch, four-post

or telco-type equipment racks. The kit is shipped with each Cisco 7100 series router and is also available

as a single FRU. The product number for the rack-mount and cable-management kit is

ACS-7100-RMK=.

Note Rubber feet for tabletop installation are included in the accessory kit that shipped with your router. (See

the “Setting the Chassis on a Tabletop” section on page 3-1.)

For detailed instructions about how to install the rack-mount and cable-management brackets on your

Cisco 7100 series router, see the “Rack-Mounting the Chassis” section on page 3-2 and the “Connecting

to the Network” section on page 3-7.

Note Information on how to install the rack-mount and cable-management brackets is in the Installing

Field-Replaceable Units in Cisco 7100 Series VPN Routers document available online and on the

Documentation CD.

Table 1-14 SDRAM DIMM Configurations

Total SDRAM Memory Configuration Product Number

64 MB

1. This is the default memory configuration for all Cisco 7100 series routers.

1 64-MB DIMM in slot DIMM 1

1 64-MB DIMM in slot DIMM 0

2. Slot DIMM 0 is used exclusively for packet memory and is fixed at 64 MB.

MEM-7120/40-64S(=)

MEM-7120/40-64P

128 MB

3. This memory product will be available in the future.

1 128-MB DIMM in slot DIMM 1 MEM-7120/40-128S=

192 MB 1 128-MB DIMM in slot DIMM 1 and

1 64-MB DIMM in slot DIMM 2

MEM-7120/40-192P=

256 MB 2 128-MB DIMMs; 1 in each slot (DIMM 1 and DIMM 2) MEM-7120/40-256P=