Specifications

B-1
Cisco 7100 Series VPN Router Installation and Configuration Guide
78-6341-03
APPENDIX B
System Specifications
Table B-1 Physical Specifications and Power Requirements
Description Specifications
Dominions (H x W x D) 3.5 in. x 17.5 in. x 18.25 in. (8.89 cm x 44.45 cm x 46.36 cm)
Weight ~ 32 lb (14.5 kg)
Heat dissipation 370W (1262 Btu
1
)
1. Btu = British thermal units.
Input voltage, AC power supply
Current
Frequency
Power factor
Input AC power
100 to 240 VAC
5 to 2.5A
2
50/60 Hz
0.80 to 0.95
525W
3
(maximum)
2. A = amperes.
3. W = watts.
AC-input cable(s) 18-AWG
4
3-wire cable, with a 3-lead IEC-320 receptacle on
the power supply end, and a country-dependent plug on the
power source end
Airflow ~120 cfm
5
Temperature 32 to 104°F (0 to 40°C) operating; –4 to 149°F (–20 to 65°C)
nonoperating
Humidity 10 to 90% noncondensing
LAN interfaces 2 Ethernet 10BaseT/100BaseTX autosensing (RJ-45)
Console and auxiliary ports Asynchronous serial (RJ-45)
WAN interface options T1/E1, T3, E3, ATM T3, ATM E3, and ATM OC-3c/STM1
single-mode intermediate reach and multimode
Recommended minimum software
requirements
Cisco IOS Release 12.0(4)XE or later releases of 12.0 XE
Cisco IOS Release 12.0(6)T or later releases of 12.0 T
Compliance CE Marking, FCC Part 68
Safety UL 1950, CSA 22.2 No. 950, EN60950, AUSTEL TS001,
AS/NZS 3260, IEC 950
EMC
6
FCC Class A (47 CFR, Part 15), ICES-003 Class A,
EN55022 Class B, CISPR22 Class B, AS/NZS 3548 Class B,
and VCCI Class B