Specifications

Extranet VPN Business Scenario 4-23
Verifying Weighted Fair Queuing
Verifying Weighted Fair Queuing
To verify the configuration:
• Enter the show interfaces serial 2/0 fair-queue EXEC command to see information on
the interface that is configured for WFQ.
hq-sanjose# show interfaces serial 2/0 fair-queue
Serial2/0 queue size 0
packets output 35, drops 0
WFQ: global queue limit 401, local queue limit 200
• Enter the show interfaces serial 2/0 EXEC command to verify the queuing for the
interface is WFQ.
hq-sanjose# show interfaces serial 2/0
Serial2/0 is up, line protocol is up
Hardware is M2T-T3 pa
-Display text omitted-
Queueing strategy:weighted fair
Output queue:0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/0/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
-Display text omitted-
Step 4—Configuring Cisco IOS Firewall Features
As discussed in Chapter 3, “Intranet VPN Business Scenario,” Cisco IOS software provides
an extensive set of security features that allow you to configure a simple or elaborate
firewall, according to your particular requirements. An extended access list was configured
in Chapter 3 to provide basic traffic filtering between the headquarters and remote office
networks and to provide users in the remote office access to private and public resources on
the headquarters network. The following section explains how to configure another
extended access list for basic traffic filtering between the headquarters and business partner;
however, the access list configured in this section provides users in the business partner
office access only to the headquarters public Web server.