Specifications

PRIVATE LINES
For private line use, stations can be prevented from dialing and/or answering any line.
PROGRAMMABLE LINE PRIVACY
Each outside line can be programmed to ignore the automatic line privacy.This allows up to four other par-
ties to join your conversation by pressing the line button.This is similar to 1A2 key telephone operation.
PROGRAMMABLE TIMERS
There are over 50 programmable system timers to allow each installation to be customized to best fit the end
user’s application.
RECALLS
Calls put on hold,transferred or camped-on to any station will recall to the originating station if not answered
within a programmable time.A recall that goes unanswered for the duration of the attendant recall timer will
recall to the system operator group. Hold, transfer, camp-on and attendant recalls have individual program-
mable timers. Calls recalling to buttons with tri-colored LEDs will flash amber.
RECALL TO OPERATOR
This function will allow the call to recall the operator instead of to the transferring station after the transfer
recall time expires.
REDIAL REVIEW
The Redial Review feature allows a review of the last number before dialing or allows access to the Call Log
Blocks if assigned.These Call Log Blocks record the last ten (10) numbers dialed.When the LNR key is pressed
the last number dialed is displayed.The log can then be scrolled using the Volume (Up/Down) keys and a pre-
viously dialed number can be selected.
REMOTE PROGRAMMING—PC
Remote programming allows the technician to access the system database from a remote location for the
purpose of making changes to the customer data.The Installation Tool is the proprietary, programming appli-
cation used to access and manipulate the telephone system database. The Installation Tool connects to the
system via LAN, WAN or serial modem connection to the OS 7030 unit. This application runs on a PC
(Windows 2000 or higher).The embedded voice mail system is programmed remotely using Internet Explorer
6.0 or higher to access the embedded Web Manager application.
RING MODES
Time Based Routing - Plans
Each C.O. line can be programmed to ring at any station or station group. Each line can be assigned a ring
destination based on six (6) different ring plans based on time of day and the day of the week. The system
operator (intercom dial “0”) can also be a different station group for each ring mode.
Automatic / Manual
Ring destinations will automatically change based on time of day and day of week.
At any time the system can be manually forced into a specific ring plan. It will remain in this ring plan until
manually taken out.
4.23
Home Page