Specifications

INDIVIDUAL LINE CONTROL
Each station in the system can be individually programmed to allow or deny dialing out as well as allow or
deny answering for each outside line.
IP KEYSETS
The OfficeServ 7030 system allows the use of Samsung proprietary keysets that use Internet Protocols (IP) for
voice and data transport. They may be local to the system or installed in a remote location via a LAN/WAN.
The OfficeServ 7030 can support up to 16 IP stations. An “IP station” is considered to be any of the following:
ITP-5107S, ITP-5121D,ITP-5112L,Softphone,or wireless handset SMT-5100E. F
or more information on how to
setup the IP keysets please ref
er to the V
OIP Special Applications Section of the
Technical Manual and the Hot
Desking (ITP Keysets) sec
tion abov
e.
LAN INTERFACE
The OfficeServ 7030 main unit provides a 10/100 base T Ethernet interface for connection to a data network.
This interface allows a high speed connection for PC programming across an IP network along with other
devices/applications on the network such as ITP phones, SPNet, CTI, LAN printers, etc.
LEAST COST ROUTING
Least Cost Routing (LCR) is the ability to automatically select the most cost effective central office route for
the outside number dialed by any station.The OfficeServ 7030 LCR program includes the following features:
• Option to use or not user LCR or a tenant basis
• Programmable LCR access code
• Digit analysis table of 2000 entries each with ten digits
• Routing by time of day and day of week (4 time bands per day)
• Modify digits table of 200 entries
• Flexible trunk group advance timer
• Option to use or not use trunk group advance warning tones
LIVE SYSTEM PROGRAMMING
The OfficeServ 7030 system can be programmed without interrupting normal system operation.
Programming changes to the telephone system can be made from any display keyset or personal computer
running Samsung’s proprietary Installation Tool application. There are three levels of telephone system pro-
gramming: Technician, Customer and Station User. Each one is controlled by different security pass codes.
The Technician level has access to all programs and can allow Customer access to system programs as need-
ed.
The Automated Attendant/Voice Mail application can only be programmed with a personal computer using
Internet Explorer 6.0 or higher connecting to the Web Management application embedded in the OfficeServ
7030.
Programming both the Automated Attendant/Voice Mail and Telephone System can be accomplished on site
using a LAN connection or remotely via the Internet.
MEET ME PAGE AND ANSWER
After a user makes a Meet Me Page, the user may remain off-hook to allow the paged party to meet the user
for a private conversation.
4.17
Home Page