Specifications

DOOR LOCK RELEASE (PROGRAMMABLE)
After answering a call from the door phone, users can dial a code to activate a contact closure. This can be
used to operate a customer-provided electric door lock release mechanism.The contact closure timer is pro-
grammable from 100–2500 ms.
DOOR PHONES
The door phone interface module (DPIM) provides for connection of a door phone to a DM port. Pressing the
button on the door phone produces a distinctive ring (three short rings repeated) at the assigned station or
station group. If not answered within a programmable time, the system releases the door phone and stops
the ringing. Stations may call the door phone directly and monitor the surrounding areas. Door phones fol-
low the system ring mode plan.
E-MAIL GATEWAY—See Unified Voicemail
EXECUTIVE BARGE-IN (OVERRIDE)
The feature allows specially programmed stations with a barge-in key to override the automatic privacy of
another station or outside trunk. Programming allows barge-in with or without a warning tone. Stations may
also be programmed as “secure”so that they cannot be barged-in on.
With Warning Tone
When the barge-in with tone option is set,the barging-in keyset has its microphone on and the barged-in on
station receives an override display. A double burst of warning tone sounds and repeats every ten seconds.
This feature does not work from single line sets.
Without Warning Tone
When the barge-in without tone option is set, the barging-in keyset has its microphone muted and the
barged-in on station does not receive an override display. This feature does not work from single line sets.
Trunk Monitor or Service Observing
This feature allows the user who barged-in to retain the trunk call after the original station has hung up.
WARNING: BARGE-IN WITHOUT TONE MAY VIOLATE STATE OR FEDERAL LAWS CONCERNING THE RIGHT TO
PRIVACY. SAMSUNG TELECOMMUNICATIONS AMERICA IS IN NO WAY RESPONSIBLE FOR THE POSSIBLE MIS-
USE OF THIS FEATURE.
EXTERNAL MUSIC INTERFACES
The OfficeServ 7030 provides one input for connecting to customer provided external music sources. This
source can be used to provide background music, or any of the varied Music On Hold (MOH) uses.
EXTERNAL PAGE INTERFACES
The OfficeServ 7030 provides one external page output and two zone control relays. Common relays are
shared between external page zones and common bell feature.
FLASH KEY OPERATION
While a user is on an outside line, pressing the FLASH key will send a timed disconnect signal to the central
office or PBX.This is used for custom calling features on C.O. lines or in conjunction with CENTREX/PBX oper-
ation. System programming allows individual flash times for C.O. and PBX lines. When C.O. or PBX flash is not
required,setting the timers for two seconds releases the existing call and returns dial tone to make a new call.
4.15
Home Page