Specifications

2.2 EMBEDDED APPLICATIONS
AUTO ATTENDANT
The OfficeServ 7030 processor has the voicemail (requires license key) and automated attendant application (2
ports standard) embedded onto the main board.The VMAA is designed to meet the demands of the sophisticat-
ed voice mail user without sacrificing simplicity.The Automated Attendant is available with two ports for process-
ing AA traffic routed to the Automated Attendant.The same two ports can be enabled to perform both the voice-
mail and automated attendant function of answering calls and storing messages into mailboxes for each exten-
sion. Two ports of AA comes standard in the OfficeServ 7030, however the 2 ports of voicemail require a license
key to enable the voicemail.
MEDIA GATEWAY INTERFACE
Eight (8) MGI channels are embedded on the main processor, and can be enabled (licensed in 1 port increments)
to support VoIP functions such as IP phones, IP networking, and IP trunking.The embedded MGI channels can be
enabled to support the following capabilities:
• IP Phones
• IP Networking (Network multiple systems over an SPNet IP Network)*
• G.729 CODEC, G.723.1, G.711, G.729A CODECs
• IP Trunking (SIP)
• T.38 Fax CODEC
• Inband or Out-of-band signaling of DTMF tones
*The OfficeServ 7030 can network using SP-Net over IP to other Samsung OfficeServ systems.
The OfficeServ 7030 also provides various common resources (standard equipment) that are shared through the
system. The OfficeServ 7030 provides the following: background music/music on hold audio inputs (radios, digi-
tal announcers, etc.) External paging audio output, loud bell audio output, common bell and programmable dry
contact closures. Other common resources embedded on the base cabinet are as follows:
MEDIA PROXY SERVICE
The Media Proxy Service (MPS) is an exciting feature of the OfficeServ 7030 system. The MPS allows IP devices
(such as SIP stations, IP phones, and SIP trunks) to be switched on the backplane without the need to first convert
conversations to TDM. There are 16 MPS channels embedded on the 7030 motherboard.This means that up to 8
IP-to-IP calls can be switched without the need to purchase an MGI license or any additional hardware. Each MPS
call uses two (2) MPS channels to complete the call.
The feature is enabled in KMMC 861 or Installation Tool Menu 2.1.5 System Options by setting MPS SERVICE to
ON. In addition, the NO MPS➔MGI setting determines if the system should attempt to use an MGI channel when
all MPS channels are busy or return an ALL TRUNKS BUSY error when all MPS channels are in use. Both settings
default to YES/NO.
When MPS service is enabled a new field will also be displayed in KMMC 820 and Installation Tool menu 3.3.1
System Link ID called NO MGI.When set to YES for a given SPNet network node communications to that node will
use MPS channels instead of MGI channels when available. In this case both SPNet nodes must have MPS Service
set to ON.
2.2
• 2 AA ports (VM ports require License Key)
• Four MGI channels (Licensed IP phones, IP trunks
and IP networking)
• 16 Media Proxy Service channels (provides con-
nection of VoIP phones and SIP trunks).
• 2 contact relays
• 4 Executive MOBEX DSPs (detect DTMF during
Executive Mobex calls).
• 4 Caller ID sender Receivers.
• 4 DTMF receivers/transmitters.
• 1 MOH/background music input.
Home Page