Specifications

viii
PA-8E 10BaseT Ethernet Port Adapter Installation and Configuration
OL-3494-04
Preface
Organization
• Cisco 7401ASR router
• Versatile Interface Processor (VIP) in Cisco 7500 series and Cisco 7000 series routers with the 7000
Series Route Switch Processor (RSP7000) and 7000 Series Chassis Interface (RSP7000CI)
Organization
This document contains the following chapters:
:
Related Documentation
Your router or switch and the Cisco IOS software running on it contain extensive features and
functionality, which are documented in the following resources:
• Cisco IOS software:
For configuration information and support, refer to the modular configuration and modular
command reference publications in the Cisco IOS software configuration documentation set that
corresponds to the software release installed on your Cisco hardware.
Note You can access Cisco IOS software configuration and hardware installation and maintenance
documentation on the World Wide Web at http://www.cisco.com,
http://www-china.cisco.com, or http://www-europe.cisco.com.
Section Title Description
Chapter 1 Overview Describes the PA-8E and its LED displays, cables,
and receptacles.
Chapter 2 Preparing for Installation Describes safety considerations, tools required,
and procedures you should perform before the
actual installation.
Chapter 3 Removing and Installing
Port Adapters
Describes the procedures for installing and
removing the PA-8E in the supported platforms.
Chapter 4 Configuring the PA-8E Provides instructions for configuring the PA-8E on
the supported platforms.