Specifications
4-19
PA-8E 10BaseT Ethernet Port Adapter Installation and Configuration
OL-3494-04
Chapter 4 Configuring the PA-8E
Checking the Configuration
The following sections provide platform-specific output examples using the show interfaces command:
• Catalyst RSM/VIP2 in Catalyst 5000 Family Switches—Example Output of the show interfaces
Command, page 4-19
• Cisco 7200 Series and Cisco uBR7200 Series Routers—Example Output of the show interfaces
Command, page 4-20
• Cisco 7201 Router—Example Output of the show interfaces Command, page 4-22
• Cisco 7401ASR Router—Example Output of the show interfaces Command, page 4-22
• VIP in Cisco 7000 Series Routers or Cisco 7500 Series Routers—Example Output of the show
interfaces Command, page 4-23
Catalyst RSM/VIP2 in Catalyst 5000 Family Switches—Example Output of the show interfaces Command
Following are examples of the show interfaces ethernet command from a Catalyst 5000 family switch.
In these examples, the eight serial interfaces (0 to 7) are on a port adapter in port adapter slot 0 of a
Catalyst RSM/VIP2; also, most of the status information for each interface is omitted. (Interfaces are
administratively shut down until you enable them.)
Router# show interfaces ethernet 0/0
Ethernet0/0 is administratively down, line protocol is down
Hardware is cyBus Ethernet, address is 0000.0ca5.2300 (bia 0000.0ca5.2389)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load 1/255
Encapsulation ARPA, loopback not set, keepalive set (10 sec)
(display text omitted)
Router# show interfaces ethernet 0/1
Ethernet0/1 is administratively down, line protocol is down
Hardware is cyBus Ethernet, address is 0000.0ca5.2301 (bia 0000.0ca5.238a)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load 1/255
Encapsulation ARPA, loopback not set, keepalive set (10 sec)
(display text omitted)
Router# show interfaces ethernet 0/2
Ethernet0/2 is administratively down, line protocol is down
Hardware is cyBus Ethernet, address is 0000.0ca5.2302 (bia 0000.0ca5.238b)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load 1/255
Encapsulation ARPA, loopback not set, keepalive set (10 sec)
(display text omitted)
Router# show interfaces ethernet 0/3
Ethernet0/3 is administratively down, line protocol is down
Hardware is cyBus Ethernet, address is 0000.0ca5.2303 (bia 0000.0ca5.238c)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load 1/255
Encapsulation ARPA, loopback not set, keepalive set (10 sec)
(display text omitted)
Router# show interfaces ethernet 0/4
Ethernet0/4 is administratively down, line protocol is down
Hardware is cyBus Ethernet, address is 0000.0ca5.2304 (bia 0000.0ca5.238d)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load 1/255
Encapsulation ARPA, loopback not set, keepalive set (10 sec)
(display text omitted)
Router# show interfaces ethernet 0/5
Ethernet0/5 is administratively down, line protocol is down
Hardware is cyBus Ethernet, address is 0000.0ca5.2305 (bia 0000.0ca5.238e)
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load 1/255
Encapsulation ARPA, loopback not set, keepalive set (10 sec)
(display text omitted)