Specifications
4-16
PA-8E 10BaseT Ethernet Port Adapter Installation and Configuration
OL-3494-04
Chapter 4 Configuring the PA-8E
Checking the Configuration
Note The slot argument is not required for Catalyst 5000 family switches.
The following sections provide platform-specific output examples using the show diag command:
• Catalyst RSM/VIP2 in Catalyst 5000 Family Switches—Example Output of the show diag
Command, page 4-16
• Cisco 7200 Series Routers and Cisco uBR7200 Series Routers—Example Output of the show diag
Command, page 4-16
• Cisco 7201 Router—Example Output of the show diag Command, page 4-17
• Cisco 7401ASR Router—Example Output of the show diag Command, page 4-17
• VIP in Cisco 7000 Series Routers and Cisco 7500 Series Routers—Example Output of the show diag
Command, page 4-18
Catalyst RSM/VIP2 in Catalyst 5000 Family Switches—Example Output of the show diag Command
Following is an example of the show diag command that shows a PA-8E installed in a Catalyst
RSM/VIP2:
Router# show diag 0
Slot 0:
Ethernet port adapter, 8 ports
Port adapter is analyzed
Port adapter insertion time 2d09h ago
Hardware revision 1.14 Board revision A0
Serial number 4294967295 Part number 73-1556-04
Test history 0x0 RMA number 00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x20:01 01 01 0E FF FF FF FF 49 06 14 04 00 00 00 00
0x30:50 00 00 00 FF FF FF FF FF FF FF FF FF FF FF FF
Slot database information:
Flags: 0x4 Insertion time: 0x1DEC (2d00h ago)
Cisco 7200 Series Routers and Cisco uBR7200 Series Routers—Example Output of the show diag Command
Following is an example of the show diag command that shows a PA-8E installed in port adapter slot 4
of a Cisco 7200 series router:
Router# show diag 4
Slot 4:
Ethernet port adapter, 8 ports
Port adapter is analyzed
Port adapter insertion time 2d09h ago
Hardware revision 1.1 Board revision A0
Serial number 4294967295 Part number 73-1556-04
Test history 0x0 RMA number 00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 02 01 01 FF FF FF FF 49 06 14 04 00 00 00 00
0x30: 50 00 00 00 FF FF FF FF FF FF FF FF FF FF FF FF
Port adapters used with the Cisco 7200 VXR and Cisco uBR7246 VXR routers require the correct base
hardware revision to function. The following error message will occur on bootup if the incorrect
hardware revision is used: