Specifications

vii
PA-8E 10BaseT Ethernet Port Adapter Installation and Configuration
OL-3494-04
Preface
This preface describes the objectives and organization of this document and explains how to find
additional information on related products and services. This preface contains the following sections:
• Document Revision History, page vii
• Objectives, page vii
• Organization, page viii
• Related Documentation, page viii
• Obtaining Documentation, Obtaining Support, and Security Guidelines, page xi
Document Revision History
The Document Revision History table below, beginning with version OL-3494-04, records technical
changes to this document.
Objectives
This document describes how to install and configure the PA-8E 10BaseT Ethernet port adapter (PA-8E),
hereafter referred to as the PA-8E, which is used in the following platforms:
• Catalyst 5000 family switches with the Route Switch Module (RSM)/second-generation Versatile
Interface Processor (VIP2)
• Cisco 7100 series routers, consisting of the Cisco 7120 series and Cisco 7140 series
• Cisco 7200 series routers and Cisco 7200 VXR routers, consisting of the two-slot Cisco 7202,
four-slot Cisco 7204 and Cisco 7204VXR, and the six-slot Cisco 7206 and Cisco 7206VXR
• Cisco uBR7200 series universal broadband routers, consisting of the three-slot Cisco uBR7223 and
the six-slot Cisco uBR7246 and Cisco uBR7246VXR
• Cisco 7201 router
• Cisco 7301 router
• Cisco 7304 PCI Port Adapter Carrier Card in the Cisco 7304 router
Document Version Date Change Summary
OL-3494-04 April, 2007 Adds Cisco 7201 router information.