Specifications

4-3
PA-8E 10BaseT Ethernet Port Adapter Installation and Configuration
OL-3494-04
Chapter 4 Configuring the PA-8E
Configuring the PA-8E Interfaces
When you have finished, press Ctrl-Z—hold down the Control key while you press Z—or enter end or
exit to exit configuration mode and return to the EXEC command interpreter.
Table 4-1 shows the shutdown command syntax for the supported platforms.
Table 4-1 Syntax of the shutdown Command for the Supported Platforms
Platform Command Example
Catalyst RSM/VIP2 in
Catalyst 5000 family switches
interface, followed by the type
(ethernet) and slot/port
(port-adapter-slot-number/
interface-port-number)
shutdown
The example is for interface 0 and interface 1 on a
port adapter in port adapter slot 1.
Router(config-if)# interface ethernet 1/0
Router(config-if)# shutdown
Router(config-if)# interface ethernet 1/1
Router(config-if)# shutdown
Ctrl-Z
Router#
Cisco 7120 series routers interface, followed by the type
(ethernet) and slot/port
(port-adapter-slot-number/
interface-port-number)
shutdown
The example is for interface 0 and interface 1 on a
port adapter in port adapter slot 3.
Router(config-if)# interface ethernet 3/0
Router(config-if)# shutdown
Router(config-if)# interface ethernet 3/1
Router(config-if)# shutdown
Ctrl-Z
Router#
Cisco 7140 series routers interface, followed by the type
(ethernet) and slot/port
(port-adapter-slot-number/
interface-port-number)
shutdown
The example is for interface 0 and interface 1 on a
port adapter in port adapter slot 4.
Router(config-if)# interface ethernet 4/0
Router(config-if)# shutdown
Router(config-if)# interface ethernet 4/1
Router(config-if)# shutdown
Ctrl-Z
Router#
Cisco 7200 series routers and
Cisco 7200 VXR routers
interface, followed by the type
(ethernet) and slot/port
(port-adapter-slot-number/
interface-port-number)
shutdown
The example is for interface 0 and interface 1 on a
port adapter in port adapter slot 6.
Router(config-if)# interface ethernet 6/0
Router(config-if)# shutdown
Router(config-if)# interface ethernet 6/1
Router(config-if)# shutdown
Ctrl-Z
Router#
Cisco 7201 router interface, followed by the type
(ethernet) and slot/port
(port-adapter-slot-number/
interface-port-number)
shutdown
The example is for interface 0 and interface 1 on a
port adapter in port adapter slot 1.
Router(config-if)# interface ethernet 1/0
Router(config-if)# shutdown
Router(config-if)# interface ethernet 1/1
Router(config-if)# shutdown
Ctrl-Z
Router#