Specifications

1-6
PA-8E 10BaseT Ethernet Port Adapter Installation and Configuration
OL-3494-04
Chapter 1 Overview
Port Adapter Slot Locations on the Supported Platforms
Depending on your PA-8E RJ-45 interface connector requirements, use the pinouts in Figure 1-4 and
Figure 1-5.
Figure 1-4 Straight-Through Cable Pinout—PA-8E RJ-45 Connection to a Hub or Repeater
Figure 1-5 Crossover Cable Pinout—PA-8E RJ-45 Connections Between Hubs and Repeaters
Port Adapter Slot Locations on the Supported Platforms
This section discusses port adapter slot locations on the supported platforms. The illustrations that
follow summarize slot location conventions on each platform:
• Catalyst RSM/VIP2 Slot Numbering, page 1-7
• Cisco 7100 Series Routers Slot Numbering, page 1-8
• Cisco 7200 Series Routers and Cisco 7200 VXR Routers Slot Numbering, page 1-8
• Cisco uBR7200 Series Router Slot Numbering, page 1-9
• Cisco 7201 Router Slot Numbering, page 1-10
• Cisco 7301 Router Slot Numbering, page 1-11
• Cisco 7304 PCI Port Adapter Carrier Card Slot Numbering, page 1-11
• Cisco 7401ASR Router Slot Numbering, page 1-12
• Cisco 7000 Series Routers and Cisco 7500 Series Routers VIP Slot Numbering, page 1-13
Hub or LAN switch Ethernet port
3 TxD+
6 TxD–
1 RxD+
2 RxD–
3 RxD+
6 RxD–
1 TxD+
2 TxD–
H7101
Hub or LAN switch
3 TxD+
6 TxD–
1 RxD+
2 RxD–
3 TxD+
6 TxD–
1 RxD+
2 RxD–
H3138
Hub or LAN switch