Specifications

Chapter 3 Configuration Procedures for the Cisco 627
Evaluate System Activity and Performance
3-20
Cisco 600 Series Installation and Operation Guide
78-11190-01
Evaluate System Activity and Performance
Table 3-2 describes the LEDs and their status.
Retrieve Statistics
The
stats
command shows information about the number of packets transmitted
and received and activity information about general applications.
Table 3-2 Status LEDs
LED Label Full Name Description
WAN-LNK WAN Link When this light is ON, it indicates that a link has been
established on the WAN port. The WAN-LNK light blinks
steadily during ADSL line training activities. When the light
is solid, the system is connected and trained.
WAN-ACT WAN Activity When this light blinks, it indicates that the WAN port is
transmitting or receiving data.
LAN-LNK ATM25 LAN Link When this light is ON, it indicates that a link has been
established on the ATM-25 port.
Note
For some ATM-25 routers or NICs, this light may not
be on till data is sent to the modem.
LAN-ACT ATM25 LAN Activity When this light blinks, it indicates activity on the ATM-25
port.
PWR Power Light When this light is Green, the system is ON and working
correctly.
ALARM Alarm Light When the light is Red, the system is ON but indicates a
problem that needs to be resolved.