Specifications

5-33
Cisco 600 Series Installation and Operation Guide
78-11190-01
Chapter 5 Configuration Procedures for the Cisco 67x CPE Devices
Configure Line Coding (Cisco 677 and Cisco 678 only)
Step 5
Be sure to reboot the CPE to activate the new image. When you log back in to the
CPE after the reboot, use the
show version
command to verify the version of the
firmware that is active. Note the CAP firmware version.
Sample Output of Configuration Session for CAP
cbos#set tftp enabled
TFTP is enabled
cbos#tftp image 10.9.1.20 c678cap.2.3.5.012.bin
Starting download...
Downloading in progress...... done.
Saving image...........done.
Please reboot the CPE for the new downl
cbos#reboot
Hello!
C67x self-update code: Release 2.3
NOTE: Do not power off router until update is finished!
Decompressing router...
Erasing FLASH......
Programming...
Decompressing monitor...
Erasing FLASH.........
Programming...
Finished. Rebooting...
Hello!
Expanding CBOS image...
CBOS v2.3.5.012 - Release Software
User Access Verification
Password:
cbos>enable
Password:
cbos#show version
Cisco Broadband Operating System
CBOS (tm) 025 - Release Software
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Dec 21 1999 20:37:27
CAP firmware version C.19
NVRAM image at 0x10356930