User guide

2-9
Cisco 678 ADSL Router Installation and Operation Guide
78-10172-01
Chapter 2 Installation Procedures
Setting Up the Cisco 678 Hardware Environment
Figure 2-6 Rear Panel Cabling Diagram
Complete the following steps to connect the cables to the Cisco 678 ADSL router:
Step 1 Plug the power cable into the back of the unit.
Step 2 Connect the Ethernet cable.
If the computer at the customer premises has only a single Ethernet-equipped
computer, attach the Cisco 678 to the computer’s Ethernet adapter with the
crossover cable provided. Otherwise, connect the Cisco 678 Ethernet port to an
Ethernet hub via a straight-through cable.
Step 3 Connect the ADSL cable to the Cisco 678 and then connect the Cisco 678 to the
ADSL line with the telephone cable provided.
24555
Power
cable
Ethernet
cable
ADSL
cable
PWR
ENET
MGMT
WALL
PHONE
Phone
cable