Installation guide

1-27
Cisco 6260 Hardware Installation Guide
OL-2365-02
Chapter 1 Product Overview
Cisco 6260 System Overview
1.2.3.8 Line Card Intermixing
Note Figure 1-6 shows the Cisco 6260 chassis slot numbers.
The Cisco 6260 chassis supports line card intermixing. This section uses the terms halves and quadrants.
The Cisco 6260 chassis consists of two halves:
• Slots 1 to 9 and slots 18 to 26 (left half of the chassis)
• Slots 12 to 17 and slots 27 to 32 (right half of the chassis)
The Cisco 6260 chassis consists of four quadrants:
• Slots 1 to 9 (top left quadrant)
• Slots 12 to 17 (top right quadrant)
• Slots 18 to 26 (bottom left quadrant)
• Slots 27 to 32 (bottom right quadrant)
The following sections describe the line card intermixing guidelines for the Cisco 6260.
SHTU-C2 Green solid
Green blinking
Off
Modem 2 is trained.
Training is in progress for modem 2.
Modem 2 is idle.
SHTU-C3 Green solid
Green blinking
Off
Modem 3 is trained.
Training is in progress for modem 3.
Modem 3 is idle.
SHTU-C4 Green solid
Green blinking
Off
Modem 4 is trained.
Training is in progress for modem 4.
Modem 4 is idle.
SHTU-C5 Green solid
Green blinking
Off
Modem 5 is trained.
Training is in progress for modem 5.
Modem 5 is idle.
SHTU-C6 Green solid
Green blinking
Off
Modem 6 is trained.
Training is in progress for modem 6.
Modem 6 is idle.
SHTU-C7 Green solid
Green blinking
Off
Modem 7 is trained.
Training is in progress for modem 7.
Modem 7 is idle.
SHTU-C8 Green solid
Green blinking
Off
Modem 8 is trained.
Training is in progress for modem 8.
Modem 8 is idle.
Table 1-9 8xG.SHDSL LED Indicators (continued)
LED Label State Function