Installation guide

1-22
Cisco 6260 Hardware Installation Guide
OL-2365-02
Chapter 1 Product Overview
Cisco 6260 System Overview
1.2.3.5.1 Faceplate Features
Figure 1-12 shows a close-up of the 8xDMT faceplate.
Figure 1-12 8xDMT Faceplate
Table 1-7 describes LEDs on the 8xDMT.
1 Ejector lever 4 ACTIVE LED
2 Locking tab 5 Modem port status LEDs
3 STATUS LED 6 Extraction tab
ATU-C1
ACTIVE
STATUS
8X DMT8 GSI
ATU-C2
ATU-C3
ATU-C4
ATU-C5
ATU-C6
ATU-C7
ATU-C8
45678
1
5
3
4
6
2
Table 1-7 8xDMT LED Indicators
LED State Function
STATUS Green slow blinking
Green solid
Red
Off
No errors, but no connection established.
The image download is in progress.
NI-2 communication established.
The self-test or line card has failed.
The ATU-C line card has had a power failure.
ACTIVE Green solid
Off
The line card is activated.
The line card is not in service.
ATU-C 1 Green solid
Green blinking
Off
Modem 1 is trained.
Training is in progress for modem 1.
Modem 1 is idle.