Installation guide

1-20
Cisco 6260 Hardware Installation Guide
OL-2365-02
Chapter 1 Product Overview
Cisco 6260 System Overview
The edge connector key, located on the rear of the 4xSDSL, connects the 4xSDSL to the backplane of
the chassis. Two edge connector keys are available for the 4xSDSL: one has six notches, and one has
seven notches. Only the seven-notched edge connector key can be installed in the Cisco 6260.
1.2.3.4.1 Faceplate Features
Figure 1-11 shows a close-up of the 4xSDSL faceplate.
Figure 1-11 4xSDSL Faceplate
Table 1-6 describes the 4xSDSL LED indicator functions.
1 Ejector lever 4 ACTIVE LED
2 Locking tab 5 Modem port status LEDs
3 STATUS LED 6 Extraction tab
18461
STU-C 1
ACTIVE
STATUS
4X SDSL
2B1Q
STU-C 2
STU-C 3
STU-C 4
5
3
4
6
2
1
Table 1-6 4xSDSL LED Indicators
LED State Function
STATUS Green slow blinking The self-test is in progress.
Green fast blinking The image download is in progress.
Green solid The status is OK.
Red The self-test or line card has failed.
Off The ATU-C line card has had a power failure.
ACTIVE Green solid The line card is activated.
Off The line card is not in service.