Installation guide

Index
IN-4
Cisco 6260 Hardware Installation Guide
OL-2365-02
connect the alarm contacts 3-13
connect the auxiliary port 3-21
connect the Cisco 6260 to the third-party POTS
splitter
3-9
connect the Ethernet to the management network 3-20
E1 network connection installation 3-16
E3 network connection 3-15
ground the Cisco 6260 and the third-party POTS
splitter
3-7
initial configuration 3-22
installing a subtended network configuration 3-18
OC-3c network connection installation 3-17
procedures 3-3
stabilize and measure rack space 3-3
verify fan tray operation 3-15
installation without a POTS splitter
apply power
4-13
attach ear brackets 4-4
attach power connections 4-9
blank faceplates 4-6
checklist 4-2
Cisco 6260 chassis 4-5
connect a console terminal 4-20
connecting the E1 subtending network
configuration
4-18
connecting the OC-3c subtending network
configuration
4-19
connect the alarm contacts 4-12
connect the auxiliary port 4-20
connect the Cisco 6260 to the MDF 4-8
connect the Ethernet to the management network 4-19
E1 network connection installation 4-15
E3 network connection 4-14
ground the Cisco 6260 4-7
initial configuration 4-21
installing a subtended network configuration 4-17
OC-3c network connection installation 4-16
procedures 4-2
stabilize and measure rack space 4-2
verify fan tray operation 4-14
intermixing
G.SHDSL guidelines
Release 12.1(7)DA2
1-28
Release 12.2(1b)DA 1-28
Release 12.2(5)DA 1-28
intermixing line cards 1-27
IOS controller alarms 5-17
L
LEDs
4xDMT
1-14
4xDMT over ISDN 1-16
4xflexi 1-18
4xSDSL 1-20
8xDMT 1-22
8xDMT over ISDN 1-24
8xG.SHDSL 1-26
PEM 1-46
line cards
4xDMT
1-13
4xDMT over ISDN 1-15
4xflexi 1-17
4xSDSL 1-19
8xDMT 1-21
8xDMT over ISDN 1-23
8xG.SHDSL 1-25
intermixing 1-27, 1-28
troubleshooting 5-10
M
management software
alarms
1-49
Cisco IOS 1-49
specifications A-12