Installation guide

C-5
Cisco 6260 Hardware Installation Guide
OL-2365-02
Appendix C Connector and Pinout Specifications
Ethernet Port
C.5 Ethernet Port
The Ethernet port, a 10BaseT interface with an RJ-48 receptacle connector, is on the NI-2 card faceplate.
It is used to connect the Cisco 6260 to the management station, a Sun SPARCstation running Cisco DSL
Manager (CDM) software. Table C-3 shows the pin assignments, and Figure C-6 shows an NI-2 card
Ethernet connector.
Figure C-6 NI-2 Card Management Ethernet Connector
Table C-3 Pin Assignments for the NI-2 Card Management Ethernet Connector
Pin
Number Signal
1TX+
2TX–
3RX+
4Unused
5Unused
6RX–
7Unused
8Unused
Pin 1
Pin 8
26893
RJ-45 female