Installation guide

A-6
Cisco 6260 Hardware Installation Guide
OL-2365-02
Appendix A Technical Specifications
Hardware Specifications
A.1.6 Octal-Port DMT ATU-C Line Card
Table A-6 lists the specifications for the 8xDMT.
Table A-6 Octal-Port DMT ATU-C Line Card Specifications
Specification Description
Standards supported
• ANSI T1.413-Issue 2, Category 1 only
• ANSI T1.413-Issue 2, Annex F (Reduced NEXT)
• Universal Test & Operations PHY for ATM, Level 2; A
standard for transport of ATM cells over a 16-bit
parallel data bus. Refer to the ATM Forum document
af-phy-0039.000.
• ITU G.992.1, Annex A (G.dmt)
• ITU G.992.2. (G.lite)
• ITU G.994.1. (G.hs)
External interfaces 8 (no connectors on card)
Data rates (per port) Upstream: Up to 1024 kbps
Downstream: Up to 8.064 Mbps
Internal hardware
• 40 MHz Motorola MPC850 microprocessor
• 8 MB SDRAM
• 1 Mb boot flash
• 1 KB serial EEPROM
Dimensions Height: 6.07 in. (15.42 cm)
Depth: 8.50 in. (21.59 cm)
Width: 0.88 in. (2.24 cm)
Weight 0.875 lb (0.4 kg)
Power consumption 24W
Minimum software and network
management requirement
Cisco IOS—Release 12.1(6)DA
CDM—Release 3.3(2)