Installation guide

A-2
Cisco 6260 Hardware Installation Guide
OL-2365-02
Appendix A Technical Specifications
Hardware Specifications
A.1.1 Cisco 6260 Chassis
Table A-1 lists the hardware specifications of the Cisco 6260 system.
Table A-1 Cisco 6260 Hardware Specifications
Specification Description
Dimensions 13.43 RUs—23.5 in. x 17.5 in. x 11.0 in. (59.7 cm x 44.5 cm x 28.0 cm)
Weight Empty—Approximately 37.5 lb (17.0 kg)
Loaded—Approximately 80 lb (36.3 kg)
Network interface ATM OC-3c (single- or multimode fiber), ATM E3, ATM E1
Note When the DS3/2DS3 NI-2 card is installed in the Cisco 6260
chassis, it assumes E3 functionality.
ADSL interface DMT—Up to 8.032 Mbps downstream/864 kbps upstream
G.lite—Up to 1.536 Mbps downstream/512 kbps upstream
SDSL interface 2B1Q—Up to 1168 kbps upstream and downstream
SHDSL interface TC-PAM
1
Craft interface Console terminal connection on the NI-2 card
Management access
• RJ-45 interface for craft alarm discovery
• RJ-45 Ethernet
• ATM in-band management
External alarm contacts Single dry contact alarm input (NO)
Power requirements
• –40.5 VDC to –75 VDC
Note See Chapter 2, “Preparing for Installation,” for detailed
power requirements.
CO operating
requirements
Temperature
Altitude
Humidity
Operating shock
Nonoperating shock
41º to 104ºF (5º to 40ºC)—Operating
23º to 131ºF (–5º to 55ºC)—Short-term operating
0 to 10,000 feet (0 to 3048 meters)—Operating
0 to 30,000 feet (0 to 9144 meters)—Nonoperating
5 to 95% (noncondensing)
5 to 500 Hz, 0.5 gravity (0.1 octave per minute)
5 to 100 Hz, 1 gravity (0.1 octave per minute);
100 to 500 Hz, 1.5 gravities (0.2 octave per minute);
500 to 1000 Hz, 1.5 gravities (0.2 octave per minute)
Maximum heat dissipation for a fully
loaded chassis
4097 BTUs/hour