Installation guide

Tables
xii
Cisco 6260 Hardware Installation Guide
OL-2365-02
Table 5-8 PEM Problems 5-16
Table 5-9 Chassis Alarm 5-17
Table 5-10 Card Slot Alarms 5-17
Table 5-11 Line Card Alarms 5-17
Table 5-12 IOS Controller Alarms 5-17
Table 5-13 OC-3c/Synchronous Transfer Mode (STM-1) Network Interface Alarms 5-18
Table 5-14 DS3/E3 Network Interface Alarms 5-18
Table 5-15 E1 Network Interface Alarms 5-19
Table 5-16 IMA Link Network Interface Alarms 5-19
Table 5-17 IMA Group Alarms 5-20
Table 5-18 NI-2 Card Redundancy Alarms 5-20
Table 5-19 Fan Tray Alarms 5-21
Table 5-20 Power Alarms 5-21
Table A-1 Cisco 6260 Hardware Specifications A-2
Table A-2 Quad-Port DMT ATU-C Line Card Specifications A-3
Table A-3 Quad-Port DMT Over ISDN Line Card Specifications A-4
Table A-4 Quad-Port Flexi ATU-C Line Card Specifications A-4
Table A-5 Quad-Port STU-C Line Card Specifications A-5
Table A-6 Octal-Port DMT ATU-C Line Card Specifications A-6
Table A-7 Octal-Port DMT ATU-C Over ISDN Line Card Specifications A-7
Table A-8 Octal-port G.SHDSL SHTU-C Line Card Specifications A-7
Table A-9 DS3/2DS3 NI-2 Card Specifications A-8
Table A-10 DS3+T1/E1 IMA NI-2 Card Specifications A-9
Table A-11 OC-3c/OC-3c NI-2 Card Specifications A-10
Table A-12 I/O Module Specifications A-11
Table A-13 PEM Specifications A-11
Table A-14 Fan Tray Specifications A-12
Table A-15 Software Specifications A-12
Table B-1 Port Mapping for Cisco 6260 Subscriber Connectors B-2
Table B-2 Standard Telco Color Chart B-6
Table C-1 I/O Module Wire-Wrap Pin Mapping C-3
Table C-2 Pin Assignments for the NI-2 Card Console and Auxiliary Connectors C-4
Table C-3 Pin Assignments for the NI-2 Card Management Ethernet Connector C-5