Product specifications
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 7
Item
Specification
●
AIR-SAP2602E-x-K95: Eco-pack (dual-band 802.11a/g/n) 5 quantity access points
Cisco SMARTnet® Service for the Cisco Aironet 2600i Access Point with internal and External antennas
●
CON-SNT-y - SMARTnet 8x5xNBD 2600i/e access point (dual-band 802.11 a/g/n)
(e.g. CON-SNT-C262IE for AP2600 internal antenna for E Domain)
Cisco Wireless LAN Services
●
AS-WLAN-CNSLT - Cisco Wireless LAN Network Planning and Design Service
●
AS-WLAN-CNSLT - Cisco Wireless LAN 802.11n Migration Service
●
AS-WLAN-CNSLT - Cisco Wireless LAN Performance and Security Assessment Service
Regulatory Domains: (x = regulatory domain)
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the
regulatory domain that corresponds to a particular country, visit: http://www.cisco.com/go/aironet/compliance.
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global
Price List.
Software
Cisco Unified Wireless Network Software Release 7.2.110 or later.
Supported Wireless
LAN Controllers
●
Cisco 2500 Series, Cisco Wireless LAN Controller Module (WLCM) on Cisco Services Ready Engine (SRE) for
Integrated Services Router Generation 2 (ISR G2), Cisco Wireless Services Module 2 (WiSM2), Cisco 5500 Series,
Cisco Flex 7500 Series
802.11n Version 2.0
(and Related)
Capabilities
●
3x4 multiple-input multiple-output (MIMO) with three spatial streams
●
Maximal ratio combining (MRC)
●
802.11n and 802.11a/g beamforming
●
20- and 40-MHz channels
●
PHY data rates up to 450 Mbps (40-MHz with 5 GHz)
●
Packet aggregation: Aggregated MAC Protocol Data Unit (A-MPDU) (Tx/Rx), Aggregated MAC Protocol Service Unit
(A-MSDU) (Tx/Rx)
●
802.11 dynamic frequency selection (DFS)
●
Cyclic shift diversity (CSD) support
Data Rates
Supported
802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11bg: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
802.11n data rates (2.4 GHz
1
and 5 GHz):
MCS Index
2
GI
3
= 800ns
GI = 400ns
20-MHz Rate (Mbps)
40-MHz Rate (Mbps)
20-MHz Rate (Mbps)
40-MHz Rate (Mbps)
0
6.5
13.5
7.2
15
1
13
27
14.4
30
2
19.5
40.5
21.7
45
3
26
54
28.9
60
4
39
81
43.3
90
5
52
108
57.8
120
6
58.5
121.5
65
135
7
65
135
72.2
150
8
13
27
14.4
30
9
26
54
28.9
60
10
39
81
43.3
90
11
52
108
57.8
120
12
78
162
86.7
180
13
104
216
115.6
240
14
117
243
130
270
1
2.4 GHz: 2 GHz does not support 40 MHz.
2
MCS Index: The Modulation and Coding Scheme (MCS) index determines the number of spatial streams, the modulation,
the coding rate, and data rate values.
3
GI: A guard interval (GI) between symbols helps receivers overcome the effects of multipath delays.