Product specifications

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 16 of 24
Environmental Ranges
Cisco Catalyst 2960XR-24TD-I 561,890
Cisco Catalyst 2960XR-48FPS-I 230,860
Cisco Catalyst 2960XR-48LPS-I 274,380
Cisco Catalyst 2960XR-24PS-I 321,290
Cisco Catalyst 2960XR-48TS-I 438,130
Cisco Catalyst 2960XR-24TS-I 557,320
Cisco PWR-C2-250WAC 1,000,000
Cisco PWR-C2-640WAC 1,000,000
Cisco PWR-C2-1025WAC 1,000,000
*
Not more than the following in a 1-year period: 96 consecutive hours, or 360 hours total, or 15 occurrences.
**
Currently estimates; Later will be Based on Telcordia SR-332 Issue 2 methodology.
Table 14. Connectors and Interfaces
Connectors and Interfaces
Ethernet Interfaces
●
10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
●
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
●
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
●
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
SFP and SFP+ Interfaces
For information about supported SFP/SFP+ modules, refer to the Transceiver Compatibility matrix tables at
cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html.
Indicator LEDs
●
Per-port status: Link integrity, disabled, activity, speed, and full duplex
●
System status: System, RPS, Stack link status, link duplex, PoE, and link speed
Stacking Interfaces
Cisco Catalyst 2960-XFlexStack-Plus stacking cables:
●
CAB-STK-E-0.5M FlexStack-Plus stacking cable with a 0.5 m length
●
CAB-STK-E-1M FlexStack-Plus stacking cable with a 1.0 m length
●
CAB-STK-E-3M FlexStack-Plus stacking cable with a 3.0 m length
Console
Cisco Catalyst 2960-X console cables:
●
CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
●
CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors
Power
●
The internal power supply is an auto-ranging unit and supports input voltages between 100 and 240V AC
●
Use the supplied AC power cord to connect the AC power connector to an AC power outlet
●
The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch
●
Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle