Product specifications

ManualsBrandsCisco ManualsConsumer electronics5508 - Wireless Controller - Network Management Device

Table 7. 2960-XR Available PoE and Switch Power Capabilities with Different Combinations of Power Supplies

Primary Power Supply Secondary Power Supply Available Power for PoE+ Switch Power

Redundancy

Available PoE Power

When One PS fails

PWR-C2-250WAC - - No -

PWR-C2-250WAC PWR-C2-250WAC - Yes -

PWR-C2-640WAC - 370W No -

PWR-C2-640WAC PWR-C2-640WAC 370W Yes 370W

PWR-C2-1025WAC - 740W No -

PWR-C2-1025WAC PWR-C2-1025WAC 740W Yes 740W

Application Visibility

Catalyst 2960-X Series Switches support NetFlow Lite, which enables IT teams to understand the mix of traffic on

their network and identify anomalies by capturing and recording specific packet flows. NetFlow Lite supports

flexible sampling of the traffic, and exports flow data in the NetFlow Version 9 format for analysis on a wide range

of Cisco and third-party collectors.

NetFlow Lite is included on all Catalyst 2960-X and 2960-XR LAN Base and IP Lite models.

Cisco Catalyst SmartOperations

Cisco Catalyst SmartOperations is a comprehensive set of capabilities that simplify LAN planning, deployment,

monitoring, and troubleshooting. Deploying SmartOperations tools reduces the time and effort required to operate

the network and lowers total cost of ownership (TCO).

●

Cisco Smart Install services enable minimal-touch deployment by providing automated Cisco IOS

Software image installation and configuration when new switches are connected to the network. This

enables network administrators to remotely manage IOS image installs and upgrades.

●

Cisco Auto SmartPorts services enable automatic configuration of switch ports as devices connect to the

switch, with settings optimized for the device type resulting in zero-touch port-policy provisioning.

●

Cisco Auto QoS is a service that automatic configuration of QoS that allows switch to manage QoS

policies based on traffic types resulting in zero-touch traffic engineering.

●

Cisco Smart Troubleshooting is an extensive array of diagnostic commands and system health checks

within the switch, including Smart Call Home. The Cisco GOLD

(Generic Online Diagnostics) and Cisco

online diagnostics on switches in live networks help predicting and detecting failures faster.

For more information about Cisco Catalyst SmartOperations, visit

cisco.com/go/SmartOperations.

Operational Simplicity Features

●

Dynamic Host Configuration Protocol (DHCP) autoconfiguration of multiple switches through a boot

server eases switch deployment.

●

Stacking master configuration management and Cisco FlexStack Plus technology helps ensure that all

switches are automatically upgraded when the master switch receives a new software version. Automatic

software version checking and updating help ensure that all stack members have the same software

version.

●

Autonegotiation on all ports automatically selects half- or full-duplex transmission mode to optimize

bandwidth.