Product specifications

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 24
The following table shows the different power supplies available in these switches and the available PoE power.
Table 5. 2960-XR Default Power Supply Configurations
Models Default Power Supply Available PoE Power
WS-C2960XR-24TS-I
WS-C2960XR-48TS-I
WS-C2960XR-24TD-I
WS-C2960XR-48TD-I
PWR-C2-250WAC -
WS-C2960XR-24PD-I
WS-C2960XR-48LPD-I
WS-C2960XR-24PS-I
WS-C2960XR-48LPS-I
PWR-C2-640WAC 370W
WS-C2960XR-48FPD-I
WS-C2960XR-48FPS-I
PWR-C2-1025WAC 740W
Intelligent Power over Ethernet Plus
Cisco Catalyst 2960-Xseries switches support both IEEE 802.3af Power over Ethernet (PoE) and IEEE 802.3at
PoE+ (up to 30W per port) to deliver lower total cost of ownership for deployments that incorporate Cisco IP
phones, Cisco Aironet
®
wireless access points, or other standards-compliant PoE/PoE+ end devices. PoE
removes the need to supply wall power to PoE-enabled devices and eliminates the cost of adding electrical
cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments.
The Catalyst 2960-X series PoE power allocation is dynamic and power mapping scale up to a maximum of 740W
PoE+ power.
The 2960-XR switch configurations offer the additional benefit of dual redundant power supplies. If both power
supplies are used, then the 2960-XR shares the load between the two power supplies for non stop power.
Table 6. 2960-X PoE and PoE+ Power Capacity
Switch Model Maximum Number of PoE+ (IEEE
802.3at) Ports
*
Maximum Number of PoE (IEEE
802.3af) Ports
*
Available PoE Power
(Single PS Source)
Cisco Catalyst 2960X-48FPD-L 24 ports up to 30W 48 ports up to 15.4W 740W
Cisco Catalyst 2960X-48LPD-L 12 ports up to 30W 24 ports up to 15.4W 370W
Cisco Catalyst 2960X-24PD-L 12 ports up to 30W 24 ports up to 15.4W 370W
Cisco Catalyst 2960X-48FPS-L 24 ports up to 30W 48 ports up to 15.4W 740W
Cisco Catalyst 2960X-48LPS-L 12 ports up to 30W 24 ports up to 15.4W 370W
Cisco Catalyst 2960X-24PS-L 12 ports up to 30W 24 ports up to 15.4W 370W
Cisco Catalyst 2960X-24PSQ-L 3 ports up to 15.4W 6 ports up to 15.4W 92W
Cisco Catalyst 2960XR-48FPD-I 24 ports up to 30W 48 ports up to 15.4W 740W
Cisco Catalyst 2960XR-48LPD-I 12 ports up to 30W 24 ports up to 15.4W 370W
Cisco Catalyst 2960XR-24PD-I 12 ports up to 30W 24 ports up to 15.4W 370W
Cisco Catalyst 2960XR-48FPS-I 24 ports up to 30W 48 ports up to 15.4W 740W
Cisco Catalyst 2960XR-48LPS-I 12 ports up to 30W 24 ports up to 15.4W 370W
Cisco Catalyst 2960XR-24PS-I 12 ports up to 30W 24 ports up to 15.4W 370W
*
Intelligent power management allows flexible power allocation across all ports.