System information

12-540
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
software version
software version
To specify the version of software to run the next time the SN 5428-2 Storage Router is restarted, use
the software version command. This command forces a system reset and changes the running version
of SN 5428-2 software.
software version v.x.y
Syntax Description
Defaults None.
Command Modes Administrator.
Command History
Usage Guidelines This command performs necessary system modifications to assure that the new software version can be
run. It causes a system reset, and the new version of software will be run when the reset is complete.
In a cluster environment, this command may temporarily suspend normal HA communications, causing
a failover of any SCSI routing instances active on the storage router. Any instances with the primary
attribute set to name of this SN 5428-2 will resume running on the storage router after it is rebooted.
Use the show software version all command to display the list of available versions, the currently
running version, and the boot version that will run when the system is reset.
Examples The following is example output from the software version command:
[SN5428-2A]# software version 3.3.1-K9
Module Size Status MD5 Digest
-------------------- -------- ------- --------------------------------
vxWorks 3538262 OK 88f817ff917bceb3d1467b593200e1cf
vxWorks.sym 240542 OK 3211a06964d8557cb58dc6a270b050bd
bootrom_uncmp.hex 1982050 OK dd0b9da60b1dfe093072ded8def3ebad
sysInit.out 210292 OK 300a7d3917216ec2e7496aca47f2483b
crashDump.out 14019 OK 76861fee62b29bd9b97f9f9a5d253c81
snmp_trapfuncs.out 554 OK e8e18bcc4c3ba1146ee48a0ad92fa7af
nuEvents.out 18555 OK 3da8de0cc6d45ee0718ac5a1d32058ee
ha.out 40192 OK 443298870c441e39bad8382b62875943
confNode.out 12237 OK 74a48c89bee7909acca4deddd911fb39
authServer.out 31899 OK 1bb37d8b2e4d67832c2f55f8d62d34ca
drv.out 31016 OK 5f44307b7e53e40f29001a4283509000
qlogic.out 489356 OK 698067006ce125cc9be243bad2763abc
qlpt.out 83569 OK 23e03f4ff2f050b666c68b5bba4d6220
i82543.out 59246 OK 6c2ffcb13ef750ff5dfd0274fbe58026
smlApi.out 31018 OK 6a737f9df89c598ef0261e84421a5359
vtp.out 17215 OK cba9a0a1168f95298525631c9e6188c2
v.x.y The version of software to be run when the system is reset.
Release Modification
3.2.1 This command was introduced.