System information

12-530
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
software http username
software http username
To configure an optional user name and password used to retrieve updated SN 5428-2 software from the
HTTP download location, use the software http username command.
software http username {webserver-username | none} [password webserver-password]
Syntax Description
Defaults By default, the user name and password are set to none.
Command Modes Administrator.
Command History
Usage Guidelines Use the show software version all command to display the current user name configured for retrieval
of updated SN 5428-2 software from the HTTP download location.
Use the keyword none to indicate that the web server does not require a user name and password to
download software, effectively changing the user name and password values to none. This is the default
setting.
See the software http url command for details on setting the location from which to download software.
Examples The following example sets the user name for HTTP download to FooAdmin and the password to foo:
[SN5428-2A]# software http username FooAdmin password foo
webserver-username The user name required to retrieve SN 5428-2 software from the download
location.
none Indicates user name and password are not required. Sets these values to
none. This is the default setting.
webserver-password (Optional) The password required to retrieve SN 5428-2 software from the
download location.
Release Modification
3.2.1 This command was introduced.