System information

12-508
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show tech-support
Related Commands Command Description
show accesslist Display the contents of the named access list or all access lists.
show admin Display system administrator contact information.
show boot Display system boot information and startup file parameters.
show bootconfig Display the bootable configuration, or create a command file based on the
bootable configuration.
show buffers Display information about buffer pools.
show clock Display the current system date and time, including the system time zone.
show cluster Display cluster-related operational statistics, including heartbeat
information.
show debug Display debug trace information for the specified SCSI routing instance.
show devices Display a list of devices discovered on the Fibre Channel interface.
show diagnostics Display hardware diagnostic test results.
show ha Display HA operational statistics for the storage router or for a specific
application.
show interface Display operational and configuration information for the specified
interface or all interfaces.
show ip Display entries from the SN 5428-2 Storage Router routing table, and
statistics about the protocols used in the storage router network.
show memory Display information about memory and related resources.
show modules Display addressing information related to the software modules.
show runningconfig Display the running configuration, or create a command file based on the
running configuration.
show scsirouter Display configuration and operational information for the named SCSI
routing instance.
show snmp Display the SNMP management configuration information for the storage
router.
show software version Display a list of software versions available on the storage router, including
the currently running version and the version that will run the next time the
storage router is restarted.
show stack Display the memory stack on a per-task basis.
show system Display selected system information, including system name.
show task Display information about the tasks running in the storage router.