System information

12-495
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show stack
show stack
To display usage of the stack on a per-task basis, use the show stack command.
show stack
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Administrator and Monitor.
Command History
Usage Guidelines The show stack command is designed for debug purposes and should be used under the guidance of a
Cisco Technical Support professional.
Examples The following is example output from the show stack command:
[techpubs2]# show stack
Stack Usage by Task
NAME ENTRY TID SIZE CUR HIGH MARGIN
------------ ------------ -------- ----- ----- ----- -------
tExcTask excTask dffe3b8 7984 240 936 7048
tLogTask logTask dffba30 4984 224 288 4696
tCrashDump crashDumpTas d73dd08 8176 160 224 7952
utilMonitor 0x000d8600b8 ca7ca98 9984 296 816 9168
tShell shell d909598 39056 464 1072 37984
tSysMon sysMonRun(in ce5cd48 4088 144 1144 2944
cppNode IpcNodeLocal d78ac88 9992 232 712 9280
cppListen IpcNodeLocal d788360 9984 384 584 9400
dpp0Node IpcNodeLocal d7859a8 9984 232 712 9272
qlFc1 QlogicFC::sc cc73de8 9992 208 2344 7648
qlFc2 QlogicFC::sc cb18de8 9992 208 2344 7648
tAuthServ authServerTa ca6aca0 15984 448 880 15104
tFtpdTask 0x00000ea660 d930698 11984 336 464 11520
HA_main HA_main_task c96da38 9992 376 2480 7512
tNuLogWatche tNuLogWatche cce75b8 16368 600 1592 14776
entropyd 0x000cf5397c c986878 16368 144 864 15504
sshmgr 0x000cf53704 c982188 16376 312 376 16000
ewTelnetd 0x000c6882a8 c97df70 8176 240 304 7872
VTP Vtp::task(vo ca73630 9992 256 1392 8600
tSnmpd 0x0000050af0 ca9e808 28664 1920 2472 26192
tProtoCDP cdp_prot(voi ca77848 16368 272 3192 13176
tCfgCopy listWatcher( ccae9e8 16368 200 328 16040
HA_newcfg HA_newcfg_ta c979c00 15984 200 3832 12152
Release Modification
3.2.1 This command was introduced.