System information

12-492
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show ssh
show ssh
To display Secure Shell (SSH) server configuration, use the show ssh command.
show ssh
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Administrator and Monitor.
Command History
Usage Guidelines Use this command to verify SSH is configured for the storage router and that the SSH service is running.
If the SSH server is enabled and the SSH service is running, you can still restrict SSH access for specific
interfaces by using the restrict command.
Examples The following is example output from the show ssh command:
[SN5428-2A]# show ssh
SSH Server Configuration
Status: enabled
Related Commands
Release Modification
3.2.1 This command was introduced.
Command Description
restrict Secure access to storage router interfaces by communications protocols and
services.
show restrict Display configurable security settings for the storage router interfaces.
show sessions Display information about active Telnet, SSH or GUI sessions to the storage
router.
show ssh fingerprint Display SSH key generation status and current public key information.
ssh enable Enable SSH and start the SSH service.
ssh keygen Generate the SSH public and private key pairs for the storage router.