System information

12-490
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show software version
show software version
To display a list of software versions available on the SN 5428-2 Storage Router, use the
show software version command.
show software version {v.x.y | all | boot | current}
Syntax Description
Defaults None.
Command Modes Administrator or Monitor.
Command History
Usage Guidelines Use the show software version all command to display the size of each version of software and the date
and time it was built. The display also shows the version of software currently running and the version
which will be booted when the system is reset. It includes the protocol and default location from which
new software is available for download and the amount of disk space currently available for new
software.
Examples The following is example output from the show software version all command:
[SN5428-2A]# show software version all
Version Boot Hash Sign Crash Size Date
-------------------- ---- ---- ---- ----- ---------- ---------------------
3.3.1-K9 OK OK N/A 0 11229.0 KB Jan 10 09:57 CDT 2003
Http Url: http://www.cisco.com
Http Username: phurley
Http Password: *****
Proxy Address:
Proxy Port:
Proxy Url:
Proxy Username:
Proxy Password:
all Display information about all versions of software available on the storage
router.
v.x.y Display information about the specified software version, including the
download file name.
boot Display information about the version of software that will run when the
system is rebooted, including the download file name.
current Display information about the version of software that is currently running
on the storage router, including the download file name.
Release Modification
3.2.1 This command was introduced.