System information

12-481
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show scsirouter
Defaults The show scsirouter command with no parameters displays the name of each SCSI routing instance
running on this storage router. Unless a specific from parameter is specified, any information displayed
is from the currently running configuration.
Command Modes Administrator or Monitor
Command History
Usage Guidelines In a cluster environment, a SCSI routing instance can only be active on one storage router at a time. Issue
the appropriate show commands from the node that is running the instance to display complete
configuration information and operational statistics. If you issue show commands from a storage router
that is not running the instance, operational statistics are not available and configuration information is
truncated.
Timesaver To display complete configuration information for a SCSI routing instance from any storage router in a
cluster, even if that SCSI routing instance is not active on that node, use the command
show scsirouter name from bootconfig.
Use the optional target or serverif keyword to restrict the display to configuration information related
to the specified element. For example:
• The command show scsirouter name target displays current configuration information, including
access list and iSCSI Name, for all targets associated with the named SCSI routing instance.
• The command show scsirouter all serverif displays current configuration information for the
Gigabit Ethernet interfaces associated with all SCSI routing instances.
host (Optional) Display status and other operational data for IP hosts currently
connected to the named SCSI routing instance.
host table (Optional) Display information about all IP hosts that have attempted to
connect to the named SCSI routing instance.
serverif (Optional) Display configuration information for the Gigabit Ethernet
interface associated with the named SCSI routing instance.
stats (Optional) Display accumulated operational information for the SCSI
routing instance. This display shows statistics accumulated since the named
SCSI routing instance became active or statistics were last cleared,
whichever is more recent.
target (Optional) Display configuration information related to targets (including
the iSCSI Name) associated with the named SCSI routing instance.
target table Display all targets, target status, and access list associations for the
specified SCSI routing instance or all instances, in table format.
tcp (Optional) Display current and maximum TCP window size for each
connected IP host.
Release Modification
3.2.1 This command was introduced.