System information

12-463
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show modules
show modules
To display addressing information about the modules included in the SN 5428-2 Storage Router, use the
show modules command.
show modules
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Administrator or Monitor.
Command History
Usage Guidelines Use this command to display the memory locations for each module of the storage router software. The
show modules command is designed for debug purposes, and should be used under the guidance of a
Cisco Technical Support professional.
Examples The following is example output from the show modules command:
[SN5428-2A]# show modules
Modules
MODULE NAME MODULE ID GROUP # TEXT START DATA START BSS START
--------------- ---------- ---------- ---------- ---------- ----------
sysInit.out 0xd8fee20 2 0xd84cd40 0xd88beb0 0xd88cf50
crashDump.out 0xd744a50 3 0xd73efc0 0xd743560 0xd7435f0
snmp_trapfuncs.out 0xd744690 4 0xd743d20 0xd743de0 0xd743e18
nuEventsCommon.out 0xd73bac8 5 0xd739590 0xd73b150 0xd73b198
nuEvents.out 0xd738cf8 6 0xd730cf0 0xd736dd0 0xd7377c8
ha.out 0xd72eab0 7 0xd6f0de0 0xd702130 0xd702460
confNode.out 0xd729ee0 8 0xd720d70 0xd728730 0xd7287e0
authServer.out 0xd729cb0 9 0xd70d960 0xd71e350 0xd71e570
drv.out 0xd6d0bb0 10 0xd6a1dc0 0xd6b13c0 0xd6b14bc
geBase.out 0xd6cb200 11 0xd6c69a0 0xd6ca350 0xd6ca3a8
i8254x.out 0xd6cafd0 12 0xd663e30 0xd67bba0 0xd67be30
qlogicBase.out 0xd6a1b88 13 0xd69f410 0xd6a1010 0xd6a10b8
qlogic.out 0xd6a1958 14 0xd45caf0 0xd4b7890 0xd54b7c8
qlogicCpp.out 0xd663bf8 15 0xd65b620 0xd662430 0xd6624f0
qlptBase.out 0xd658068 16 0xd656c40 0xd6578f0 0xd657928
qlptCpp.out 0xd656528 17 0xd653bf0 0xd6557d0 0xd655830
qlptDpp.out 0xd652a40 18 0xd5e3680 0xd5fa500 0xd60d600
encap.out 0xd64d110 19 0xd6496b0 0xd64bfe0 0xd64c060
smlApi.out 0xd647fa8 20 0xd639b00 0xd646240 0xd6464b0
vtp.out 0xd639298 21 0xd631f10 0xd637c90 0xd637dd0
Release Modification
3.2.1 This command was introduced.