System information
12-453
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show interface
fci1 up type Fibre Channel
fci2 up type Fibre Channel
ge1 up 10.1.10.45/ffffff00 02012d020304 type Gigabit Ethernet
ge2 up 10.3.10.23/ffffff00 02034d030405 type Gigabit Ethernet
The following is example output from the show interface stats command, for the FC interface fc4:
[SN5428-2A]# show interface fc4 stats
Port Attribute Value Port Attribute Value
------------------------- ---------- ------------------------- ----------
BytePerf 0 FramePerf 0
TxBytePerf 0 TxFramePerf 0
RxBytePerf 0 RxFramePerf 0
ErrorRates 16
Login Count 0x6 Logout Count 0x5
Total Errors 0xb Invalid Dest Addr 0x0
Class2 Frames In 0x0 Class2 Frames Out 0x0
Class3 Frames In 0x93 Class3 Frames Out 0x68
Total Rx Frames 0x93 Total Tx Frames 0x68
Class2 Words In 0x0 Class2 Words Out 0x0
Class3 Words In 0x0 Class3 Words Out 0x87
Total Rx Words 0x0 Total Tx Words 0x87
Decode Error Count 0xb Loss of Sync Count 0x1
Invalid CRC Count 0x0 Tx Wait Count 0x34
Class3 Toss Count 0x0 FReject Count 0x0
FBusy Count 0x0 Link Failures 0x0
Flow Error Count 0x0 LP_TOV Timeout Count 0x0
Primitive Seq Errors 0x0
Rx Link Resets 0x0 Rx Offline Seq 0x0
Tx Link Resets 0x0 Tx Offline Seq 0xc
Total Link Resets 0x0 Total Offline Seq 0xc
AL Init Count 0x9 AL Init Error Count 0x1
LIP_F7_F7_Count 0x8 LIP_F7_AL_PS Count 0x1
LIP_F8_F7_Count 0x0 LIP_F8_AL_PS Count 0x0
Total LIPS Received 0x9 LIP_AL_PD_AL_PS Count 0x0
Table 12-33 describes the port attributes shown in the display:
Table 12-33 Description of Port Attributes in the “show interface stats” Command Output
Port Attribute Description
BytePerf Total number of bytes processed by this port.
TxBytePerf Total number of bytes transmitted by this port.
RxBytePerf Total number of bytes received by this port.
ErrorRates The error rate for this port.
FramePerf Total number of frames processed by this port.
TxFramePerf Total number of frames transmitted by this port.
RxFramePerf Total number of frames received by this port.
Login Count Incremented when a user logs in.
Total Errors Total number of errors detected.