System information

12-45
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
clear conf
Deleting system configuration makes the storage router unavailable to Telnet, SSH or web-based GUI
sessions until the management interface is reconfigured with an IP address via a console connection. See
Chapter 2, “First-Time Configuration,” for more information about initial system configuration.
Note The clear conf wizard will not reset any Secure Shell (SSH) public and private key pairs generated for
the storage router. Use the ssh keygen command to generate new SSH keys after the storage router is
restored to the selected factory default settings.
Examples The following example removes all SCSI routing instances from the storage router. The system
configuration settings are retained.
[SN5428-2_A1]# clear conf
Enter admin password: *****
This process can restore factory default settings for the SN5428-2.
* Select "apps" to remove active applications and retain system
configuration settings.
* Select "system" to remove active applications and system
configuration settings.
* Select "saved" to remove all backup configurations from disk.
* Select "all" to remove active applications, system configuration,
and saved configurations.
The system configuration includes the management port, dns, admin and
monitor login, ntp, and snmp. You will need to use the console
to reconfigure the management port if you erase the system configuration.
The system will reboot if you select "apps", "system", or "all".
Erase what? [apps/system/saved/all/cancel (cancel)]apps
Configuration cleared. System configuration settings retained.
System halting.............!
System has been halted
Related Commands Command Description
setup access Run the wizard to configure Monitor mode and Administrator mode
passwords.
setup cluster Change the configuration of the high availability environment.
setup fcip Run the wizard to manually configure FCIP instances.
setup iscsi-port Run the wizard to manually configure the port used for iSCSI traffic.
setup mgmt Run the wizard to configure the management interface.
setup netmgmt Run the wizard to configure network management.
setup scsi Run the wizard to configure a SCSI routing instance.
setup time Run the wizard to configure the system date and time.