System information

12-440
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show fcswitch nameserver
show fcswitch nameserver
To display the local Fibre Channel (FC) nameserver database, use the show fcswitch nameserver
command.
show fcswitch nameserver {all | brief}
Syntax Description
Defaults None.
Command Modes Administrator or Monitor.
Command History
Usage Guidelines All devices in a fabric are assigned a unique 24-bit public address by the fabric. The fabric also maintains
a database of all the devices and their addresses. The database is called the fabric nameserver, and is
used by host connections to determine the devices that they can communicate with.
Use this command to display the local fabric nameserver database.
Examples The following is example output from the show fcswitch nameserver brief command:
[SN5428-2A]# show fcswitch nameserver brief
Port Id Port Type Port Number Port WWN Port IP Address
------- ------- --------------- ----------------- -------------------------------
4e0000 N 0 280000048aa58710 00000000
4e01d1 NL 1 2200001026448a0d 00000000
4e01d2 NL 1 22000003be3203bc 00000000
4e0e00 N 15 290000048aa58710 00000000
4 entries found
all Display the local fabric nameserver database.
brief Display abbreviated information from the local fabric nameserver database.
Release Modification
3.2.1 This command was introduced.