System information

12-416
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show devices
show devices
To display a list of devices found on the SN 5428-2 Storage Router Fibre Channel (FC) network, use the
show devices command.
show devices [all | brief]
show devices [fc?] [lunid | serial]
show devices rediscover
Syntax Description
Defaults None.
Command Modes Administrator or Monitor.
Command History
Usage Guidelines Use this command to display information about all devices discovered on the named FC interface, or all
FC interfaces. This information can be used when assigning targets to SCSI routing instances. The
storage information includes the associated interface, WWPN, port ID, device type, LUN number, LUN
ID type and LUN ID, capacity, vendor, product name, and LUN serial number.
The output of this command is limited to devices that are visible to the FC initiator interfaces (fci1 and
fci2).
Use the rediscover keyword to clear the existing list of devices and begin a new discovery process on
the FC network. Issue the show devices command again to display all discovered devices.
all (Optional) Keyword used to display information for all devices on all FC
interfaces.
brief (Optional) Keyword used to limit the display to serial number information,
including vendor and product, for all devices on all FC interfaces.
fc? (Optional) Limit the display to devices on the named FC interface. Valid
values are fc1 through fc8. When you type the show devices fc? command,
the CLI lists the interfaces available. You cannot specify a nonexistent
interface.
lunid (Optional) Keyword used to limit the display to LUN information for the
devices on the specified interface or all FC interfaces.
serial (Optional) Keyword used to limit the display to serial number information,
including vendor and product, for devices on the specified interface or all
FC interfaces.
rediscover (Optional) Begin a new discovery process on the FC network
Release Modification
3.2.1 This command was introduced.