System information

12-409
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show debug interface fc?
show debug interface fc?
To display debug information for internal Fibre Channel (FC) interface switch ports, use the
show debug interface fc? command.
show debug interface fc? [hosts | stats]
Syntax Description
Defaults None.
Command Modes Administrator or Monitor.
Command History
Usage Guidelines The show debug interface fc? command is designed for debug purposes, and should be used under the
guidance of a Cisco Technical Support professional.
Examples The following example displays debug information for the internal FC interface switch port fc0:
[SN5428-2_PR]# show debug interface fc0
Operational Data
Interface Stat IP/Netmask MAC Options
--------- ---- ------------------------ ------------ -------
fc0 up type Fibre Channel
OperState enabled
PortID 010000
WWN 200000059ba69821
LinkSpeed 2Gb/s
LinkState Active
SyncState SyncAcquired
LoginStatus LoggedIn
Loopback Status Not Running
MaxCredit 12
DonatedToPort None
RunningType f-port
PendingType f-port
InBandMgmt enabled
SFPType NotApplicable
SFPVendor N/A
SFPVendorID N/A
fc? Display debug information for the specified internal FC interface switch
ports. When you type the show debug interface fc? command, the CLI lists
the interfaces available. You cannot specify a nonexistent interface.
hosts Keyword used to display FC hosts information.
stats Keywords used to display statistics and configuration information.
Release Modification
3.2.1 This command was introduced.