System information

12-407

Cisco SN 5428-2 Storage Router Software Configuration Guide

78-15471-01

Chapter 12 Command Line Interface Reference

show debug fcswitch

To display internal Fibre Channel (FC) interface parameters, use the show debug fcswitch command.

show debug fcswitch {all | brief | memory | tech-support}

show debug fcswitch clish text

Syntax Description

Defaults None.

Command Modes Administrator or Monitor.

Command History

Usage Guidelines The show debug fcswitch command is designed for debug purposes, and should be used under the

guidance of a Cisco Technical Support professional.

Use the show debug fcswitch brief or show debug fcswitch all commands to display initiator WWPN

information (fci1 is initiator WWPN1 and fci2 is initiator WWPN2) and other parameters related to the

internal FC interfaces.

Examples The following example displays various configuration parameters for the internal FC interfaces, and the

last five switch log entries:

[SN5428-2_PR]# show debug fcswitch brief

Interface WWPN switch port

--------- ----------------

fc0 200000021e071161

fc15 200f00021e071161

all Display all interface parameters for internal FC interfaces fc0, fc15, fci1

and fci2, including all switch log entries.

brief Display all interface parameters for internal FC interfaces fc0, fc15, fci1

and fci2. Includes only the last 5 switch log entries.

memory Display memory usage for the integrated FC switch component.

tech-support Display technical support information for the integrated FC switch

component.

clish text Display internal operational information for the integrated FC switch

component. The text argument is any valid switch “show” command. If the

text argument includes spaces, enclose it in quotation marks.

Release Modification

3.2.1 This command was introduced.