System information

12-396
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show cluster
show cluster
To display operational information related to the high availability (HA) cluster, use the show cluster
command.
show cluster
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Administrator or Monitor.
Command History
Usage Guidelines Use this command to display cluster information for the storage router whether it is in standalone or
clustered mode.
Examples The following example displays cluster information. In this example, the storage router named
SN 5428-2A belongs to a cluster.
[SN5428-2A]# show cluster
Cluster Name: Weblab
Cluster Changes: 2
Last Change: Tue Mar 19 04:12:51 GMT+6 2002
IP Multicast Address: 224.0.0.101
Operating Message Version: V3
Detected Configuration Errors: None
Local Node: SN5428-2A
HA Configuration: CLUSTERED
HA: up MGMT Port: up HA Port: up
Sent 19240 heartbeats
Rcvd 19238 heartbeats
Cluster Node List:
System Name MGMT IP HA IP Last Heard From
SN5428-2A 10.1.10.244 10.1.20.56 Self
SN5428-2B 10.1.10.223 10.1.20.98 Tue Mar 18 05:17:43
Application List:
Application Name Master on State Last Config Update
scsirouter/scsi1 SN5428-2A Master Mar 18 21:23:45
scsirouter/scsi2 SN5428-2B Slave Mar 18 23:21:10
AAA, Access List, password, & VLAN Management is on SN5428-2B
Release Modification
3.2.1 This command was introduced.