System information

12-385
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
show cdp entry
Related Commands Command Description
cdp enable Enable or disable CDP on the SN 5428-2 Storage Router.
cdp holdtime Specify the amount of time the receiving device should hold a CDP packet
from the SN 5428-2 Storage Router before discarding it.
cdp interface Switch CDP on or off for the specified interface.
cdp timer Specify the amount of time between transmissions of CDP packets from the
SN 5428-2 Storage Router.
show cdp Display global CDP configuration information for the storage router.
show cdp interface Display information about the storage router interfaces on which CDP is
enabled.
show cdp neighbors Display detailed information about neighboring devices discovered using
CDP.
show cdp traffic Display information about traffic between devices gathered using CDP.