System information

12-369

Cisco SN 5428-2 Storage Router Software Configuration Guide

78-15471-01

Chapter 12 Command Line Interface Reference

show boot

To display system boot information and startup file parameters, use the show boot command.

show boot

Syntax Description This command has no arguments or keywords.

Defaults None.

Command Modes Administrator or Monitor.

Command History

Usage Guidelines Use this command to view system boot information, such as the boot device type, path to the boot image,

and path to the file containing the startup commands. The show boot command is designed for debug

purposes, and should be used under the guidance of a Cisco Technical Support professional.

Examples The following example displays system boot information:

[SN5428-2A]# show boot

Boot Device: ata=0,00

Boot File: /ata0/vxWorks

Startup File: /ata0/NuSpeed.start

Flags: 0x0

Other: fei

Related Commands

Release Modification

3.2.1 This command was introduced.

Command Description

show software version Display a list of software versions available on the storage router, including

the currently running version and the version that will run the next time the

storage router is restarted.