System information

12-340
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
setup
Examples The following shows the initial explanatory text for the setup command:
[SN5428-2_A]# setup
You are about to set up the SN5428-2. Running this wizard will modify
the configuration of this system.
During setup, operational changes will take place. However, these changes
are not saved until the end of the script. To quit the setup wizard without
saving changes, ** hit CTRL-C at any time **. Reboot to restore previous values.
For multiple choice questions, the system will present the choices enclosed
in brackets []. Each multiple choice question has a default answer that is
selected when you press return.
Example: [yes/no (no)].
Choices are yes and no. No is the default answer.
For configuration variables, the current value saved in the system is
presented in brackets [varname]. If the configuration variable does not have a
value, the system will present a set of brackets [(empty)] or a template that
provides the expected format of the value.
Example: [mySN5428-2] configuration variable has a value
Example: [(empty)] configuration variable does not have a value, no template
Example: [A.B.C.D] template for an IP address.
User level for setup? [novice/expert (expert)]
Related Commands Command Description
clear conf Return most configuration settings to factory defaults.
setup access Run the wizard to configure Monitor mode and Administrator mode
passwords.
setup cluster Change the configuration of the high availability environment.
setup fcip Run the wizard to manually configure FCIP instances.
setup iscsi-port Run the wizard to manually configure the port used for iSCSI traffic.
setup mgmt Run the wizard to configure the management interface.
setup netmgmt Run the wizard to configure network management.
setup scsi Run the wizard to configure a SCSI routing instance.
setup time Run the wizard to configure the system date and time.