System information

12-339
Cisco SN 5428-2 Storage Router Software Configuration Guide
78-15471-01
Chapter 12 Command Line Interface Reference
setup
• Management Access—configures passwords for monitoring and configuring the storage router.
• SCSI Routing—configures a SCSI routing instance. The wizard is only available when the storage
router is deployed for SCSI routing; it is not available if the storage router is deployed for
transparent SCSI routing.
• FCIP—configures FCIP instances. The wizard is only available when the storage router is deployed
for FCIP; it is not available if the storage router is deployed for SCSI routing or transparent SCSI
routing.
If the storage router is deployed for SCSI routing, the CLI also provides a Cluster wizard, which
configures the storage router to participate in a high availability cluster. Because the initial configuration
script configures the high availability environment, the Setup configuration wizard does not include the
Cluster wizard. However, the Cluster wizard, using the setup cluster command, can be run after initial
system configuration to change the configuration mode from standalone to clustered, to change
membership from one cluster to another, or to resign from a cluster and run as a standalone storage
router. See Chapter 2, “First-Time Configuration,” for more information about initial system
configuration.
During configuration with the Setup configuration wizard, operational changes take place and are
applied to the currently running system. For example, after the Network Management wizard completes,
SNMP network management will be configured for the storage router. However, these changes are not
saved to the system’s bootable configuration until the end of the entire Setup configuration wizard. To
quit the setup configuration wizard without saving changes, press Ctrl-C at any time before the end of
the wizard, and then reboot the storage router to restore previous values.
Note Some changes may be retained after a reboot. Be sure to review the values provided in the prompts that
display if you rerun the setup configuration wizard or run each individual wizard.
After entering the Setup configuration wizard, several informational messages display, including the
following prompt:
User level for setup? [novice/expert (expert)]
• Enter novice to continue with the configuration process. Explanatory text displays before each
prompt in the wizard.
• Enter expert to continue with the configuration process, suppressing all explanatory text. If you are
an experienced user familiar with the setup configuration wizard, you may prefer this option.
At the end of the Setup configuration wizard, the following prompt displays:
Done with setup.
Note Only one setup wizard can be active at any given time. Multiple users cannot run multiple setup wizards
concurrently.